Electronic Digital Pressure Switch OLED Display 4 Digits (PCM710)

Model NO.: PCM710
Display Mode: OLED Display of 4 Digits
Output Mode: PNP, NPN
Operating Temp.: -25ºC-80ºC
Protection: IP65
Housing Material: 304
Diaphragm Material: 316L
Accuracy: 0.2%Fs, 0.5%Fs
Load Capacity: 24V 1.2A
Trademark: WTsensor
Origin: China
Model NO.: PCM710
Display Mode: OLED Display of 4 Digits
Output Mode: PNP, NPN
Operating Temp.: -25ºC-80ºC
Protection: IP65
Housing Material: 304
Diaphragm Material: 316L
Accuracy: 0.2%Fs, 0.5%Fs
Load Capacity: 24V 1.2A
Trademark: WTsensor
Origin: China
Features
High precision
Adjustable response time
NPN, PNP compatible, free switching
Button operation, shortcut button for zero calibration, fast unit switching
OLED shows current pressure
LED for node action, easy to observe


Applications
Hydropower
Chemical industry
City water supply
Scientific research
Accurate measurement and control of pressure of fluids

Overview

PCM710 electronic digital pressure switch is an intelligent digital product for pressure measuring and controlling which integrates pressure measurement, display, output and control. The product is in full electronic structure. Piezoresistive silicon pressure sensor is adopted in the front end. The output signal is processed by the amplifier of high precision and low temperature drift, and then sent into high precision A/D converter. Through arithmetic processing by microprocessor, the output signal is displayed on site with 2-way switch output, accomplishing the measurement of the pressure of control system.
PCM710 has advantages of flexible use, simple operation, easy debugging and high safety and reliability. It is widely used in hydropower, tap water, petroleum, chemical, mechanical, hydraulic and other industries for the measurement, display and control of pressure of fluids.
 
Performance parameters
 
Pressure range 0~10kPa…100MPa
Overpressure 150~300%F.S.
Accuracy 0.1, 0.5
Supply 12 - 30V, 24V recommended
Display mode OLED display of 4 digits
Output mode 2-way switch, NPN and PNP compatible
Load capacity ≤24V 1.2A
Power consumption ≤15mA
Operating temp. -25ºC-80ºC
Storage temp. -40ºC-100ºC
Response time ≤20ms
Insulation 100MΩ/250VDC
Protection IP65
 
Structural performance parameters
 
Housing material 304
Medium compatibility Liquid contacting diaphragm 316L, pressure port 304
 
Structure and dimensions
 
Electronic Digital Pressure Switch OLED Display 4 Digits (PCM710)
Wring method
 
Electronic Digital Pressure Switch OLED Display 4 Digits (PCM710)
Pressure range selection
 
Code Pressure reference Pressure range Overpressure %FS Burst pressure %FS
10k G 0~10kPa 300 600
35k G 0~35kPa 300 600
70k G 0~70kPa 300 600
100k G, A 0~100kPa 200 500
250k G, A 0~250kPa 200 500
400k G, A 0~400kPa 200 500
600k G, A 0~600kPa 200 500
1.0M G, A 0~1.0MPa 200 500
2.5M G, S 0~2.5MPa 200 500
6M S 0~6MPa 200 400
10M S 0~10MPa 200 400
16M S 0~16MPa 200 400
25M S 0~25MPa 150 300
40M S 0~40MPa 150 300
60M S 0~60MPa 150 300
100M S 0~100MPa 150 200

Note: G: Gauge pressure, A: Absolute pressure, S: Sealed gauge pressure
 
How to order
 

Electronic Digital Pressure Switch OLED Display 4 Digits (PCM710)
Example: PCM710-1MGP4C1
Refer to PCM710 pressure switch, with pressure range 1MPa, gauge pressure, accuracy ±0.2%FS, and threaded connection M20×1.5.

 
Optional accessories
 
Name Specification
M12×1 female with wire M12×1 female 5-pin with wire 2m

Ordering tips:
  1. Ensure compatibility between measured media and contacting part of product.
  2. Customization is available for special requirements on the appearance and performance parameters of the product.

  Features
High precision
Adjustable response time
NPN, PNP compatible, free switching
Button operation, shortcut button for zero calibration, fast unit switching
OLED shows current pressure
LED for node action, easy to observe


Applications
Hydropower
Chemical industry
City water supply
Scientific research
Accurate measurement and control of pressure of fluids

Overview

PCM710 electronic digital pressure switch is an intelligent digital product for pressure measuring and controlling which integrates pressure measurement, display, output and control. The product is in full electronic structure. Piezoresistive silicon pressure sensor is adopted in the front end. The output signal is processed by the amplifier of high precision and low temperature drift, and then sent into high precision A/D converter. Through arithmetic processing by microprocessor, the output signal is displayed on site with 2-way switch output, accomplishing the measurement of the pressure of control system.
PCM710 has advantages of flexible use, simple operation, easy debugging and high safety and reliability. It is widely used in hydropower, tap water, petroleum, chemical, mechanical, hydraulic and other industries for the measurement, display and control of pressure of fluids.
 
Performance parameters
 
Pressure range 0~10kPa…100MPa
Overpressure 150~300%F.S.
Accuracy 0.1, 0.5
Supply 12 - 30V, 24V recommended
Display mode OLED display of 4 digits
Output mode 2-way switch, NPN and PNP compatible
Load capacity ≤24V 1.2A
Power consumption ≤15mA
Operating temp. -25ºC-80ºC
Storage temp. -40ºC-100ºC
Response time ≤20ms
Insulation 100MΩ/250VDC
Protection IP65
 
Structural performance parameters
 
Housing material 304
Medium compatibility Liquid contacting diaphragm 316L, pressure port 304
 
Structure and dimensions
 
Electronic Digital Pressure Switch OLED Display 4 Digits (PCM710)
Wring method
 
Electronic Digital Pressure Switch OLED Display 4 Digits (PCM710)
Pressure range selection
Â