Remote real-time collection, monitoring and management of power consumption information for SHP power stations

Common management solutions
1, manual telephone dispatch management
These power stations are located in remote areas with low construction investment, small power generation, simple equipment and operation management, low degree of automation, and poor communication conditions. The measurement of on-grid electricity is simple. Most of them use ordinary three-phase mechanical metering, manual meter reading or manual telephone meter reading, and the monitoring of the power quality of the Internet is hardly conducted and managed. Even the scheduling order is notified by telephone instead of The load changes automatically.
The disadvantages of this management are:
u The overall grid security is not high;
u Communication is not timely and automatic power adjustment cannot be achieved;
u The workload of manual meter reading is inaccurate, and the measurement is inaccurate, which directly affects the settlement of on-grid electricity and electricity bills;
u The power supply quality of the power station cannot be monitored in real time.
2, remote optical fiber scheduling communication management
According to the regulations of the State Grid Corporation of China and the Electricity Regulatory Commission on power generation companies, power plants with a generating capacity of more than 10,000 kilowatts are dispatched by the Provincial Company Dispatching Bureau, and the power generation capacity is dispatched to the dispatch center of the local electric power bureau below 10,000 kilowatts, and Requires that two sets of communication channels (optical fiber dispatching private network) are required to communicate with the dispatching bureau, receive scheduling commands, upload relevant power generation information, and have special electric energy collection cabinets to measure collection at the outlet platform or at the substation that accesses the large network. Internet power and internet power quality.
The characteristics of this management method in terms of management and economic benefits:
u Accurate measurement, timely collection, easy calculation and transmission of electricity charge;
u High safety requirements;
u timely communication, real-time monitoring of power generation quality;
u The corresponding equipment investment is high, increasing the burden on the power station;
u The corresponding equipment has high technical and operational requirements, and it is complicated and difficult to master and use.
Recommended program
The on-grid power management and real-time power quality monitoring and management of these small and medium-sized power stations cannot rely on manual management to be accurate and timely, but the construction of fiber-optic dispatching private networks will require power companies and power stations to increase their capital investment. The burden on both parties, therefore, requires a set of acquisition and monitoring system solutions that can meet the power company's timely and timely collection of grid-connected electricity, real-time monitoring of online power quality requirements, and control of construction costs so that power companies and power stations can afford. Provides reliable means and basis for power company's power station (small hydropower station) management (settlement management) and dispatch management.
With 10 years of accumulated experience in the power industry, our company has accumulated a wealth of business resources and a variety of mature applications. Among them, ordinary three-phase electronic meters and special collection and monitoring terminals for power plants are used as hardware devices, electric energy collection platforms and management analysis platforms are used as main station management software platforms, and GPRS\CDMA communication technologies are used as data transmission channels to form a power station. Power remote real-time acquisition monitoring and management system—provides a set of mature and stable solutions for collecting power for on-grid power generation of small-scale power plants (plants) and remote real-time monitoring and monitoring of power quality on-grid.
System Overview
The “Long-Term Real-time Acquisition Monitoring and Management System for Power Generation of Power Stations” can remotely collect and remotely transmit power generated by power plants (plants), on-grid power, and plant power, and conduct real-time online monitoring of power quality and on-grid power quality. Monitor the three-phase balance, current, and voltage fluctuations, and perform statistical analysis, alarms, and other information on abnormal conditions.
System Features:
u Adopt GPRS remote wireless data transmission technology to collect data remotely without human intervention and without user intervention
u Understand the working conditions of the power station in a timely manner, and timely understand the power generated by the power station, on-grid electricity, and self-use electricity.
u Remote real-time monitoring and monitoring of the production and operation of the power station to prevent abnormal power generation.
u remote real-time monitoring of the quality of the electrical energy and Internet power, voltage, current changes;
u Use ordinary three-phase multi-function electronic meter and GPRS communication, low investment cost, high cost performance
u The system can access the dispatching system of the power company and become an important basis for scheduling management.

System functions
Electric energy collection platform:
Collect power data of the power station through GPRS\CDMA remote data transmission:
Data types that can be collected for multi-function electronic energy meters:
(Forward, Reverse, Active, and Reactive) Total Power, Time Period Power, Demand, Demand Time, Voltage, Current, Power, Power Factor, Frequency, etc. (Requires Meter Support)


Management Analysis Platform:
Ø Platform Overview
The management and analysis platform can draw network connection diagrams, facilitate the entry and modification of power station and related equipment file data, and monitor the abnormal power generation information of the power station through multiple data analysis, drawing current and voltage variation curves.
Ø Functional description
2 Collecting power generation information in real time
Scheduled and real-time meter reading, copying of various power generation information, remote upload to the system master station
2 Real-time acquisition of current and voltage change data
Real-time collection of current and voltage change data for power transmission, remote upload to the acquisition platform, analysis and processing by the management and analysis platform to determine abnormality.
2 Drawing of various variable curves
Drawings or reports provide variable curves for a certain period of time.
2 Power abnormality detection function
When an abnormality occurs in the inspection plant electricity (abnormality in power generation, phase loss, and pressure loss), the alarm prompt appears on the screen, prompting the plant and station dispatch management personnel to make judgments and corrections.


System application mode
System hardware features:
1. Transparent bidirectional data transmission of GPRS\CDMA can be adopted and the link is automatically maintained.
2. The data collection platform automatically collects data from the data management terminal according to the set task, and the time interval can be set.
3. The data terminal has a balance function: the balance time can be set at any time as requested by the user.
4. Freeze function: You can freeze data immediately by sending commands.
5, event recording function.
The data transmission method should have the conditions
1. The basic conditions for the remote transmission of GPRS\CDMA data
1 Data management terminal with GPRS\CDMA communication method, such as: HX2009E data terminal
2 Open data GPRS for GPRS\CDMA service, a data terminal requires a card (purchased by the user himself at the local telecom operator, and the traffic cost is borne by the user)
3 The public network data transmission mode should have: Static IP (public network IP) data collection center server, when conditional APN telecommunication network transmission mode is available.
4 The transmission mode of the APN telecommunications network shall include: a telecommunications private network data collection center server (or a dedicated router), and the SIM card adopts the bound IP mode. This method is recommended for use.
Complete system equipment
1, hardware equipment:
u Data management terminal with GPRS\CDMA communication mode, and one dedicated data terminal for HX2010D power station;
u Ordinary three-phase multi-function electronic watch (in compliance with DL645-1997, 2007 statute);
2, software equipment:
u Collection monitoring master station software;
Applications
The power point management system is used for remote real-time management of power points such as small hydropower stations and substations, which improves the company's information modernization management level and management techniques. Compared with three-phase multi-function network tables, it has more investment advantages and performance advantages, and is more suitable for counties. Power company application.
The system has been put into operation at Daduhe Electric Power Co., Ltd., British Power Company, and Mianzhu Power Company. The data collection is timely, accurate, and stable. Bring practical benefits to power companies.
(author contact information)

This entry was posted in on