Still the taste of Sony MDR-1ABT Bluetooth headset out of the box

Sony headphones are generally divided into two types, one is in the middle, one is used in the middle, but the MDR-1R that Sony once launched is a headset that is used again and in China. Today we received the MDR- 1ABT is the Bluetooth version of 1A's replacement product 1A. Then there is a Bluetooth audio bonus in the middle of the fancy, and the tie-off from the cable will be more useful?

The box is still a white background plus the product renderings, huge wireless and Bluetooth logos, and the Hi-Res gold standard, the same style as the previous Z7.

The back is usually a variety of specifications, and because the Bluetooth version can control the music playback, there is also a side panel touch control guide on the back.

The 1ABT unit is a 40mm aluminum-plated polymer liquid crystal diaphragm--seeing this diaphragm material, the author suddenly has a tight chrysanthemum, and perhaps 1ABT is an under-permanent earphone...

1ABT supports aptX and LDAC. As for how the technical principles are not discussed here, what you need to know is that Bluetooth devices that support this technology can provide better sound quality than Bluetooth devices when playing music using Bluetooth. The premise is that your mobile phone also supports aptX or LDAC. The flagship mobile phones of international manufacturers are generally supported, at least the former will be supported, and then Sony will also add DSEE function, which is to further improve the sound quality, but the DSEE function should be only using Bluetooth. It will be enabled when listening.

The white cover is a black box.

Open the black box and find one earphone. The one that is hung is still a simple touch operation. Tap on the shell of the right ear unit to control the music play/pause. Press and hold to adjust the volume, and slide back and forth. Very intimate design, the operating power is also good.

In addition to the headphone body, there is a 3.5mm plug, a 1.2m long headphone cable, a MicroUSB cable, a storage bag and a manual. The original storage bag is also a tradition from the 1R of the year. conscience.

There will be a model number on the side of the head beam.

The unit casing and the head beam are made of metal. The head beam is covered with a soft layer of leather. The matte looks quite graded. Then the NFC logo is convenient for NFC touch. The NFC-enabled mobile phone can be touched. Direct pairing connection, as for the iPhone, it is still honestly search and match.

There are also touch operation instructions inside the right head beam - just put this place and many people will not see it.

The ear pad is also leather, the material is very soft and comfortable, and the durability should be safe. Before the friend's 1R was released from the release, it has been used until now, and the leather part has no obvious damage and aging. Of course, if it is special If you don't care, you can't help but destroy it.

With a microphone, Bluetooth calls don't need to be used. If the built-in battery is dead, you can plug in the headset cable and use it as a normal headset.

There is a vent hole at the top of the unit to enhance the low frequency performance. Like the original 1R, there is no difference in shape.

The charging interface is at the bottom of the left unit, and the protective cover is open. The standard MicroUSB charging is quite convenient.

Out of the box, Sony Xperia Z Ultra and Samsung Galaxy S6 Edge can be connected directly through NFC. As for the iPhone, because the pairing is too cumbersome, it is too lazy to test, but there should be no problem, NFC may be practical. Not too high, but when you need it, you can solve a lot of things, so you still have to have it.

The size of the 1ABT earmuffs is not as big as it seems (after all, 40mm units), the all-inclusive design will have better wearing comfort than other ear-type designs, but in the summer, the heat is certain, the head The beam's elasticity is moderate, so even the younger one in the picture is not wearing a pang.

In the initial audition, when 1ABT uses Bluetooth to connect to the mobile phone, the overall sound continues the previous 1R style, and the driving difficulty is not high when the cable is directly plugged in, but the main use scene of this headset is still based on wireless Bluetooth listening. The detailed sound quality evaluation will be offered after a period of downtime, I hope everyone will continue to pay attention to us.