According to the statistics of China Lighting Association, China is now the world's largest producer of energy-saving lamps. Eight of the 10 energy-saving lamps in the global market are produced in China. China's technology, equipment and quality testing have reached the international leading level.
However, while the quality products gradually occupy the international market, the domestic energy-saving lamp market is quite chaotic.
On August 10, China Consumers Association cooperated with the quality inspection department to announce to consumers the results of comparative tests on 23 energy-saving lamps that have met the national compulsory safety standards: 36% of the products failed to achieve “saving electricity and longevity†"The requirement, after 2000 hours of ignition, the light effect is difficult to meet the requirements, "to achieve 80% of the initial light effect", belonging to the "short life light." This status quo has led to the embarrassing situation of energy-saving lamps that “saving electricity and not saving moneyâ€.
International and domestic thresholds are very different
In recent years, energy saving and emission reduction has become a global slogan. The EU passed an agreement at the spring summit in Brussels, which ended on March 9 this year. To reduce greenhouse gas emissions, the era of incandescent lamps will be completely extinguished by 2009. The "green lighting project" of the Chinese government has also been confirmed, and it has become one of the top ten energy-saving projects in the "Eleventh Five-Year Plan". During the "Eleventh Five-Year Plan" period, the Chinese government plans to purchase 150 million energy-saving lamps to take the lead in promoting the use of energy-saving lamps.
“The vast majority of energy-saving lamps on the US market are produced in China.†Yang Zheng, deputy director of the National Electric Light Source Quality Supervision Center, said, “The quality of energy-saving lamps exported to the United States is quite high. In terms of performance requirements, the United States is importing energy-saving lamps. It is set very high, and the ignition time should be at least 10,000 hours; if 3 of the 10 sample lamps do not meet the requirements, this batch is a substandard product."
Since the "Chinese lamp" can meet the demanding quality of the US market, why is it doing well in the domestic market?
Wang Zhigang, a certified engineer at the China National Institute of Standardization's successful certification center (formerly China Energy Conservation Product Certification Center), said that compared with the high threshold of the United States, "domestic energy-saving lamps from production to market, manufacturers in addition to consciously comply with national mandatory safety standards, and then Be a 'form test' including items such as color tolerance, and you can enter the city without any other threshold."
“The industrial and commercial administration will conduct annual quality inspections on the products.†Yang Zheng said, “But the unqualified products will not be required to be delisted. Only the local industry and commerce authorities will impose fines on them and require 'qualified 'As for how to do qualified, and lack professional technical guidance."
For the performance of energy-saving lamps, there is no mandatory standard in China. There is only one recommended standard. The so-called “recommended†means that manufacturers should set up enterprise standards according to this. In terms of life, the standard requires that the minimum life of energy-saving lamps is not lower than 6000 hours.
In this regard, Dong Jingsheng, deputy secretary-general of China Consumers Association, said: "Unqualified products should be delisted, and supervision must be strict. In order to let consumers trust energy-saving lamps, product quality is the lifeblood, supervision should be strengthened--children Certainly disobedient, the key is how the guardian does it and what the educator does."
Consumers must recognize "ID card"
Liu Shengping, deputy secretary-general of the China Lighting Association, said that since the government proposed the implementation of green lighting projects in 1996 to promote the use of energy-saving lamps, the output of energy-saving lamps in China has increased from 100 million in 1998 to 2.4 billion in 2006. About 70% of the 2.4 billion are exported to foreign countries, and less than 30% are domestically sold. Among them, many energy-saving lamps companies are forced to “go awayâ€.
Deputy Director Yang Zheng said: "The domestic market is under pressure. In order to stand on the market, big companies rely on brands, small businesses rely on low prices and 'guerrilla tactics', while medium-sized companies have good product quality but no living space, so they would rather lower Some profits must also be sold in the international market."
In order to standardize the market, eliminate inferior products, and guide healthy consumption, the China Consumers Association and the quality inspection department conducted a comparative test of 23 energy-saving lamps. It is also an "ID card" for quality energy-saving lamps (referred to by the China Quality Certification Center). CQC safety certification certificate and the “section†word mark of the certification of the certification center, the former reflects the safety and energy efficiency of energy-saving lamps have reached the national standard level, the latter proves the promotion of energy-saving lamps, and hopes to get the attention of consumers. Helping the poor in the consumption chain.
Deputy Director Yang Zheng said: "At present, the market share of domestic well-known brands is expanding. The greater the crackdown, the better the qualification rate will be. There are many high-quality enterprises in China, and the state should increase the propaganda of good enterprises."
1
Industrial Low High Bay Lighting Led Driver
Constant current LED driver, Ul Dimmable Transformer, With global manufacturing standards and various certifications including CE, UL and FCC, our lighting products are sold in domestic market and are exported to various international markets including US, UK, France, Germany, Australia, Africa, Korea etc. We offer a wide range of Led Lighting Solutions which includes LED Linear Lighting or System, , LED Lams, LED High bay lights etc. Maximize beauty of your workplace with our beautiful Warehouse Lighting, Warehouse Lights Driver, Workshop Lighting, Supermarket Lighting and Factory lighting solutions.
Application: Specifically for high bay light, High Power Led Driver above 100W,normal for outdoor for waterproof, AC100-277V, 0-10V/PWM/RX dimming,short circuit protection,class 2 satety output design, passed the UL/FCC/TUV/RCM/CB/CE Certified. Europe and North America market.
Parameter:
Input voltage: 100-277vac
output voltage: 25-143vdc
current: 0.1A- 3.3A.
Power:108W
Power factor: >0.9
IP degree: IP65
Dimming:0-10V / PWM / RX / DALI.
>=50000hours, 5 years warranty.
certificate: UL CE FCC TUV SAA ect.
FAQ:
Question 1:Are you a factory or a trading company?
Answer: We are a factory.
Question 2: Payment term?
Answer: 30% TT deposit + 70% TT before shipment,50% TT deposit + 50% LC balance, Flexible payment
can be negotiated.
Question 3: What's the main business of Fahold?
Answer: Fahold focused on LED controllers and dimmers from 2010. We have 28 engineers who dedicated themselves to researching and developing LED controlling and dimming system.
Question 4: What Fahold will do if we have problems after receiving your products?
Answer: Our products have been strictly inspected before shipping. Once you receive the products you are not satisfied, please feel free to contact us in time, we will do our best to solve any of your problems with our good after-sale service.
Industrial Low High Bay Lighting Led Driver
Industrial High Bay Driver,Heat Resistant Ufo Led Driver,200W Led Driver
ShenZhen Fahold Electronic Limited , http://www.fahold.com