A negative oxygen ion generator circuit diagram

Specializing in the production of LED chip LED LED lamp beads
Industrial Router Crystal 3.2*2.5mm 3225 26M (26.000MHZ) 12PF 10PPM 20PPM 30PPM
Photocoupler

An important technical indicator of a negative oxygen ion generator is the concentration of negative oxygen ions. The concentration value generally indicated in the generator specification is the concentration of negative oxygen ions in the air at 20-cm directly in front of the negative oxygen ion generator. The concentration at or above 20 cm is not the same, therefore, the negative oxygen ion The concentration must be calculated and tested theoretically. The negative oxygen ion stream discharged from the negative oxygen ion generator contains a conducting current and a current carrying current.

The human body itself is a complex and wonderfully charged system. Every cell in the human body is a micro-battery with a potential difference of 50-90 millivolts inside and outside the cell membrane. Since the cell membrane is very thin, the electric field strength through this film is as high as volts/cm. Only when the cell battery is continuously charged and discharged, our nervous system can quickly and accurately sense the senses of sight, hearing, taste, smell and touch. The information is passed to the brain, and the brain is commanded to execute the relevant organs to maintain the normal activities of the body. The filling and discharging process of cells is maintained by the constant supplementation of negative oxygen ions. If there are too few negative oxygen ions in the air, the cells are not supplemented by negative oxygen ions, and the normal state of the cell charge and discharge process is difficult to maintain. It will affect the normal physiological activities of the human body and even cause diseases.

The following figure shows a circuit diagram of a negative oxygen ion generator.

Chlorinated Polyethylene Tape

Chlorinated Polyethylene Tape is also called CPE tape.

CPE plastic bag, it is made of high density polyethylene (HDPE) by chlorination substitution reaction of polymer material, not high temperature resistance, according to the structure and use of different, chlorinated polyethylene can be divided into resin chlorinated polyethylene (CPE) and elastic type of chlorinated polyethylene (CM) two categories. Thermoplastic resin can be used alone, but also with polyvinyl chloride (PVC), polyethylene (PE), polypropylene (PP), polystyrene (PS), ABS and other resins and even polyurethane (PU) blends.

CPE plastic bag, it is made of high density polyethylene (HDPE) by chlorination substitution reaction of polymer material, high temperature resistance.


It is translucent milky white, is made of high density polyethylene by chlorination substitution reaction of polymer material, feel more soft, not easy to deformation, aging resistance, not easy to wear.

Waterproof Electrical Tape HB1505 is a kind of Chlorinated Polyethylene Tape whitch has double layer,made from elasticity insulation materials and waterproof mastic.Overload temperature can reach 100℃ max.

Together with other Electrical Tapes,Special Adhesiveand and Insulating Tape,become our best-selling products.




Chlorinated Polyethylene Tape,Water Proof Tape,Waterproof Electrical Tape,Waterproof Sealing Tape

CAS Applied Chemistry Materials Co.,Ltd. , https://www.casac1997.com

This entry was posted in on