For the first time, I flashed the TV box. I didn't know how to do it before. The box couldn't enter the system. Stop at YUNOS. Find a lot of methods, tried many times, and finally successfully brush! ! !
Share my experience:
1, I started with the WIN10 notebook flash, after installing the box driver, using USB to connect the computer can not identify the device, so use WINXP desktop.
2, WINXP desktop installation driver, connect the life box, prompting the missing WINUSB.DLL, so find this thing from the Internet, on the windows/system32/ below just fine.
3, before the brush machine to use the wire, the box on the motherboard of the two holes short-circuit (can not find the location can contact me), as for the Internet said: withstand two holes in the middle of the USB port, for this machine useless.
Say a few more:
1, install the box drive timing, to connect the computer with USB and found new hardware, and then install the driver.
2. When using the Brush Tool to brush in the firmware, you must first "erasing FALSH" and then brush into the firmware. Otherwise there will be "Firmware download failed"
Experience:
Because I was the first time to brush machine, I was very worried about the failure of the brush machine, the box will always become a brick, so I have been looking for the official version of the "Dimple X5 four-antenna 8G" "RK3128"
However, there is no "RK3128" in the download area of ​​the special official website, and it was forced to brush the Android version. ! ! Fortunately, many attempts have finally been successful, brush into Android 4.4, no longer have to worry about YUNOS recurrence automatically delete the software! !
Here's what I've used for Flash:
1, brush tool, firmware, tutorial method Brush Pack: http://pan.baidu.com/s/1ntYhYGh
2, the video tutorial (this video is Di You special X5 two antenna version and my four antenna version are the same, are RK3128 chip, the same motherboard location), brush must be opened before the shell optimistic about the chip model, do not brush the wrong firmware link: http ://bbs.shafa.com/thread-1267079-1-1.html
The motherboard has a short hole that can be seen in the video tutorial.
The pro-test box was purchased from the Tmall Di special flagship store! ! !
The above experience is shared to Di You special X5 four-antenna 8G PLUS will not brush the rookie! ! ! Because I am also a brick out of the box, sincerely provided to everyone, I will only this model.
Special note this machine is quad-core RK3128
This article is reproduced article
Share my experience:
1, I started with the WIN10 notebook flash, after installing the box driver, using USB to connect the computer can not identify the device, so use WINXP desktop.
2, WINXP desktop installation driver, connect the life box, prompting the missing WINUSB.DLL, so find this thing from the Internet, on the windows/system32/ below just fine.
3, before the brush machine to use the wire, the box on the motherboard of the two holes short-circuit (can not find the location can contact me), as for the Internet said: withstand two holes in the middle of the USB port, for this machine useless.
Say a few more:
1, install the box drive timing, to connect the computer with USB and found new hardware, and then install the driver.
2. When using the Brush Tool to brush in the firmware, you must first "erasing FALSH" and then brush into the firmware. Otherwise there will be "Firmware download failed"
Experience:
Because I was the first time to brush machine, I was very worried about the failure of the brush machine, the box will always become a brick, so I have been looking for the official version of the "Dimple X5 four-antenna 8G" "RK3128"
However, there is no "RK3128" in the download area of ​​the special official website, and it was forced to brush the Android version. ! ! Fortunately, many attempts have finally been successful, brush into Android 4.4, no longer have to worry about YUNOS recurrence automatically delete the software! !
Here's what I've used for Flash:
1, brush tool, firmware, tutorial method Brush Pack: http://pan.baidu.com/s/1ntYhYGh
2, the video tutorial (this video is Di You special X5 two antenna version and my four antenna version are the same, are RK3128 chip, the same motherboard location), brush must be opened before the shell optimistic about the chip model, do not brush the wrong firmware link: http ://bbs.shafa.com/thread-1267079-1-1.html
The motherboard has a short hole that can be seen in the video tutorial.
The pro-test box was purchased from the Tmall Di special flagship store! ! !
The above experience is shared to Di You special X5 four-antenna 8G PLUS will not brush the rookie! ! ! Because I am also a brick out of the box, sincerely provided to everyone, I will only this model.
Special note this machine is quad-core RK3128
This article is reproduced article