Non-ferrous Metals Weekly: Twelfth Five-Year Plan Boosts New Metal Materials into Fast Track

QE3 is expected to fail and the metal market is diving. The meeting of European finance ministers and central bank governors held at the end of last week had been highly hoped by the market. Eventually no breakthrough was made and the most concerned Greek rescue plan was not finalized. The expectations of the Fed to launch QE3 at the meeting on the 20th and 21st meeting failed, and the metal market fell into disappointment. Copper and nickel all set the biggest single-day drop since 2008 on that day. This week, LME copper, aluminum, lead, zinc, nickel, tin and COMEX gold fell by 15.36%, 7.31%, 17.34%, 11.51%, 12.55%, 15.06% and 8.56%, respectively. This week, domestic copper, aluminum, zinc spot premiums have been significantly enlarged, and the international copper sales have increased sharply, showing a more pessimistic market sentiment; aluminum stocks in the domestic exchanges fell for the 28th consecutive week.

The wire and cable operating rate remained good, and lead smelting companies reluctantly sold to change the supply and demand pattern. 1. In September, the average operating rate of 20 wire and cable companies was 91.3%, and the overall operating rate was high. The gap between the operating rate of large-scale wire and cable companies and medium-sized cable companies has increased since August. 2. This week, the main transaction range of alumina prices was between 2850-2900 yuan/ton. New electrolytic aluminum production capacity in northwestern China will be put into operation immediately. Demand has greatly supported prices.

Spot aluminum prices fell sharply this week due to the rise in the US dollar. The cost of primary aluminum remained at around 7.7, and the profit margin of electrolytic aluminum plants narrowed substantially. 3. The price of lead continued to slump during the week, and individual small-scale ground-level lead-zinc mines suspended their production. Lead prices fell sharply. Smelters reluctantly sold their goods more emotionally, and domestic supply and demand patterns changed. However, this did not significantly boost the desire of downstream lead-acid battery companies to purchase. Except for some enterprises that want to maintain normal production, they choose stocks before the National Day, and most companies still prudently purchase them with a guarantee of normal supply.

The overall stability of the rare earth market, the gradual decline in the market rose gradually the market outlook may fluctuate. 1. This week, the overall performance of rare earth prices is relatively stable, rare earth metal 镨钕 ≥ 99% tax quoted in the market at 120-130 yuan / ton; 镧 oxide tax included in the price of 1350-14.5 yuan / ton; 镨 镨 99% market report 90-95 million yuan / ton, cerium oxide ≥ 99.9% market reported 100-110 yuan / ton; currently the domestic offer NdFeB N35 in the 405-410 yuan / kg. 2. This week, the price of Changjiang No. 1 antimony ingot has increased by 500 yuan/ton to 101,750 yuan/ton. On Friday, some small-scale plants slightly lowered the price of antimony ingots and antimony oxide. 3. More than 65% of this week's wolframite concentrate market reported at 1.53-1.35 million yuan per ton, and more than 65% of the scheelite concentrate market reported at 1.52-10.54 million yuan per ton; the APT market reported at 23.6-23.8 million yuan per ton. 4. This week the domestic molybdenum market has dropped slightly, the mainstream molybdenum and iron prices in the 13.8-14.3 million yuan / ton; raw materials, the mainstream price of molybdenum concentrate in 2020 yuan / ton.

New metal materials enter the fast track of development, with medium-to-long-term focus on supply-constrained/extensive expansion varieties: China's 12th Five-Year Plan for New Materials will boost rare earth permanent magnets, superhard materials, high-performance carbides, and light alloys (aluminum and magnesium Titanium, etc.) Enter the fast track of development, and we can pay attention to Xiamen Tungsten Industry Co., Ltd., Baotie Co., Ltd., Zhongke Sanhuan Co., Ltd., Ningbo Yunsheng Co., Ltd. The global economic recovery has slowed down, the debt problem in Europe and the United States has not yet been resolved, industrial metals have been lacking in strength, and cautious views have been maintained in the short-term, and adjustments can be made in the latter stage to focus on the rapid expansion of Tongling Nonferrous Metals and Chihong Zinc Alloy. The supply of constrained small metal resources is worth attention in the medium to long term. China's rare metal resource integration and price alliance will support the upside of the “Tungsten, Antimony, Indium, Gallium, and Indium” and other advantageous varieties, and recommend Xiamen Tungsten, Chenzhou Mining and Tin Industry shares.

PCB Prototype

Prototype PCB Specification:
In the process of developing a Printed Circuit Board-based solution for your company? This can be an extremely time-consuming, labor-intensive process where there is a high degree of uncertainty in the outcome. Developing a PCB prototype offers a fast, cost-effective option for getting your design from concept to production, while minimizing some of the risks associated with a Standard PCB service. 
Prototype Printed Circuit Boards That Meet Our High Quality Standards:
BentePCB offers rapid PCB prototyping services in very good quality yet at a low cost. We're fully compliant with ISO9001:2008 quality management systems, and we have an in-house quality control department to verify that all work meets our high standards. Depending on your custom requirements, we can prototype your PCB within 3-7 days, compared to -18 days of Standard PCB service. 

Check out our Circuit Board prototype capabilities in the following table:

Features

Capability

Quality Grade

Standard IPC 2

Number of Layers

1 - 16layers

Order Quantity

5pcs - 100pcs

Build Time

2 - 7 days

Material

FR-4 Standard Tg 140°C

Board Size

Min 6*6mm | Max 500*500mm

Board size tolerance

±0.1mm - ±0.3mm

Board Thickness

0.4mm - 2.0mm

Board Thickness Tolerance

±0.1mm - ±10% of thickness of board

Copper Weight

1.0oz - 2.0oz

Inner Layer Copper Weight

0.5oz - 1.0oz

Copper Thickness Tolerance

+0μm +20μm

Min Tracing/Spacing

5mil/5mil

Solder Mask Sides

As per the file

Solder Mask Color

Green, White, Blue, Black, Red, Yellow

Silkscreen Sides

As per the file

Silkscreen Color

White, Black

Surface Finish

Lead Free HASL - RoHS 
HASL - Hot Air Solder Leveling 
ENIG - Electroless Nickle/Immersion Gold - RoHS

Min Annular Ring

5mil

Min Drilling Hole Diameter

8mil

Min Width of Cutout (NPTH)

0.8mm

NPTH Hole Size Tolerance

±.002" (±0.05mm)

Min Width of Slot Hole (PTH)

0.6mm

PTH Hole Size Tolerance

±.003" (±0.08mm) - ±.006" (±0.15mm)

Surface/Hole Plating Thickness

20μm - 30μm

SM Tolerance (LPI)

.003" (0.075mm)

Aspect Ratio

1.10 (hole size: board thickness)

Test

10V - 250V, flying probe or testing fixture

 What Are the Benefits of Circuit Board Prototyping?

We recommend you chose PCB prototyping service for function testing of new products prior to making a commitment to a full-production run. Benefits of developing PCB board prototype include:

• Rapidly test and correct designs if there is any mistake

• Opportunity to detect potential design flaws in the early stages

• Quick turnaround time helps you achieve your productivity goals

• Low-quantity production runs featuring a minimum order quantity of only one boards

• Lower production tolerances provide a clear indication of how well the finished PCB will perform

Once your prototype boards demonstrated their ability to meet your quality and performance requirements, it is ready for a full production run. Then we will transition to Standard PCB service. It provides tighter production tolerances and more advanced options including free Design for Manufacture (DFM) check that is capable of detecting potential issues which could reduce the quality of your PCB.


About Us:

BentePCB is a professional PCB manufacturing which is focus on double side, multilayer, HDI PCB , rigid PCB and Flexible PCB mass production. The company was established on 2011.
We have two factories together, The factory in Shenzhen is specialized in small and middle volume orders and the factory in Jiangxi is for big volumn.

Why Us?

UL (E492586), ISO9001,  ISO14001, TS16949, RoHS certified.
Turnover USD 
10-50 million per year.
15,000 sqm area, 450 staff .
Mass Production from single to 
16 layers.
Special Material:
ROGERS, Arlon, Taconic.etc.
Client:
Huawei, SAMSUNG, Malata, Midea,Texas Instruments.etc.


Certification(UL:E492586, TS16949, ISO14001, ISO9001,RoHS):

ISO9001,ISO14001UL:E492586

Factory Tour:

PCB Manufacturer

PCB Factory

PCB Manufacturing

Exhibition:

We Took part in the famous exhibitions over the past years,and got highly appreciation from the top experts,as well as cooperated tightly with them.

Exhibition

Delivery:

BentePCB offers flexible shipping methods for our customers, you may choose from one of the methods below.
Delivery

FAQ:

Q1: What does BentePCB need for a customized PCB order?
A: The customers need to provide Gerber or pcb file.If you do not have the file in the correct format, you can send all the details related to the products.
Q2: What is your quotation policy?
A: For the PCB order in large quantity, BentePCB will send you the quotation based on the MOQ of the products concerned, and the price will be reasonable with good quality.
Q3: How long will you send us quotation ?
A: After all files were sent, 2 to 8 hours as per your file.
Q4:What is your minimum order quantity?
A:Our MOQ is 1 PCS.
Q5: How about the service BentePCB offered to the customers?
A: If you have any questions about our products or company, do not hesitate to send us your inquiry toour customer service representatives, Your satisfaction is our pursuits.

PCB China

We don`t just sell PCBs .We sell sleep.

Contact Us

Prototype PCB

Prototype PCB, Prototype PCB Board, Prototype Printed Circuit Board, High Density Prototype PCB

Shenzhen Bente Circuit Limited , http://www.bentegroup.com

This entry was posted in on