Storage control desktop

Storage control desktop

Silence was a long time in the Aunt too much to see too much of the original himself is lazy to write has not been written, and finally a day of tea drinking insomnia - to 3 o'clock really can not sleep to write ~ ~

Still can not afford to buy a large study, you can only get up and down the knife in the space, and still have their own work more free time to organize these

The study is actually an octagonal sun room inside the master bedroom. It is estimated that it will be 2-3 square feet. There are various things. Although there will always be some sort of line, there will always be some lines that are filled out. Take a good look, like the same!

Prepare a variety of tools first, because it is still necessary to tighten the screws but also drill the electric drill.

Tables: Workers do not buy the right ones to find custom-made plywood sandwich panels. The two are not solid. After all, this type of worker's wall is quite stable.

Computers: desktops and laptops are usually placed on a bay window

Printer: Because it is necessary to give the son and his wife occasionally to print photos and documents, he bought a Canon printer for hundreds of bucks.

Two monitors, an AOC behind the time of graduation to buy an AOC with 7/8 years of helplessness has not been bad, but not willing to discard abandoned position occupied, then bought a display stand to be a dual screen

The purpose is to not see the open line, unless there is no way such as the host that makes the desktop space is large enough

Prepared list:

Line tube

Before reading the value of friends to buy to buy that kind of paste line tube, 50CM12 block, and paste is more apathetic paste because after a period of time to fall, and ultimately decided to use the beam line tube screw, although relatively troublesome but firmly not used Worried about falling problems, and it is also worth a metre of 3 more money

Bracket:


Hub:



Male steak



Tie

Audio rack:



Subwoofer racks directly with large corners

Because the fixation feels resonant



Rubber gaskets to reduce the point of contact in the corner and the bottom of the table contact, do not like to open their own very much like a lot of comfort

Everything is ready to start, anyway

When you start the installation, it is very troublesome to find one by one, and the operation space is inconvenient. Experience has first drilled the hole in the line pipe to fix the screw.

Said that the next audio, may be such a friend would say that sound is not good, but it is not the so-called after all, home to listen to the song can sound like it, but it is recommended that friends first look in advance to the structure where the sound of friends ~ with short screws, In the past, many things on the desktop led to a poor position to let go, about the plug-in board, in fact, when the decoration has been prefabricated super wall boxes also specially installed to insert the results found last, or less can only use the line to make up This Nanfu's cable used almost 6-7 years. Maybe it will be no problem, lazy for the value is not bad, although not see, there is another one because the desktop USB host interface although many But lazy people really do not want to bend over to a U disk like the whole HUB color style meaning to enter anyway, can not use any difference to where to match on the line, for the opening size to everyone to wake up When I opened this big hole, the first 35 holes I had opened were smaller than the cover 53 I bought, so I continued to know which one had accidentally opened a 67. The biggest block was still a little bit worse. I couldn't fix it. Began to fix it with glass adhesive Shaking, though only a little, or can not stand, bought a free nail glue directly fixed very, very strong, I believe it will not move after the head is large or else

The amount of ~~ feels a bit long in the above paragraph.

Make a direct effect on the final rendering



Under the explosion:


Summary: Eliminate hidden chaotic lines For mouse and keyboard lines, please ignore ~~~ The desktop space is greatly increased. The room is not quite crowded. It is enough for me. It is also occasionally sitting in front of the computer at night to play a stand-alone game. Enough to use haha, the lack of a chair is too large at that time the friend sent, not a bad, still rely on the okay to change another, or a little money for a big house, is to do a video room and guest tea room ~


The first time we wrote the original essay, there are many deficiencies in the area. We also hope that everyone will give us a lot of guidance. Thank you!

JUKI Feeder

JUKI Feeder, best price for the customers, original new or used one, in stock.

Original: JAPAN

ATF, CTF, FTF actually are called AF, CF, FF.

Firstly, JUKI ATF feeder is a new style feeder based on high-speed machine KE2070.

Secondly, JUKI CTF feeder is an old style feeder based on middle-speed machine KE2050 2060 FX-1.

Thirdly, JUKI FTF feeder is called for all the mechanic feeders whose size is greater than 12mm.

The following spare parts will alse be on sale in our company:

SAMSUNG Feeder

SMT Feeder For Samsung

Panasonic Smt Feeder

Panasonic Feeder

Smt Machine Panasonic Feeder

Smt Feeder For Panasonic

Smt Feeder For Juki

Juki Feeder

Juki Smt Feeder

Smt Machine Juki Feeder

I-Pulse Feeder




Juki Feeder,Juki Smt Feeder,Smt Machine Juki Feeder,Smt Feeder For Juki

Shenzhen Srisung Technology Co.,Limited , https://www.sr-smts.com

This entry was posted in on